Research paper on hydraulic ram pump - Nagroda Pascal.

The hydraulic Ram pump or hydram is a complete automatic device that uses the energy in the flowing water such as spring, stream or river to pump part of the water to a height above that of the source. With a continuous flow of water a hydram operates.

Hydraulic Ram Pumps. Research has shown that livestock perform better with water provided in a clean trough than when drinking directly from existing surface water sources. There is increasing pressure to limit the use of surface water. Hydraulic Ram Pump technology has been around since the late 1700’s. The first.

TR13 New Developments in Hydraulic Ram Pumping 2 This technical release has been written more for ram pump enthusiasts, researchers and manufacturers than for installers and users. It describes the main current trends in system and pump design. 1 GENERAL TRENDS The ram pump is a 'mature' technology. Over the last.

Abstract —This paper presents the analytical calculations for the hydraulic ram pump using the average head losses. The study specifies that head losses includes while doing the sample calculations affects on the output results of the ram.

Abstract - The hydraulic ram pump is a simple durable pump that can be used to deliver water from one source to another.

ABSTRACT This project report is about designing a hydraulic ram pump to transfer water from a river into awater tank with given dimensions and conditions. The hydraulic ram pump designed is believedto be the most suitable and efficient for the given conditions based on the calculations performed. For the first step of designing, all the related problems are listed and understand.

The hydraulic ram uses the kinetic energy of water flowing in a driver pipe to pump up about 10% of it to a higher elevation. Thereby, no external energy input is needed. As a lot of studies had been carried out constructing hydraulic rams with self built valves and for high water supply, the aim of this investigation was to construct a reliable and low-cost ram, made of locally available off.

The hydraulic ram pump design will also provide opportunities for continued work. It is our plan to assure continuation of this project with non-seniors on the team and recruitment of new members. The completion of this project will also be a significant step in improving public health in Haiti.

Internal journal of engineering and research of a generalized design approach for hydraulic ram pump, Oct 2013. (2) Shuaibu Ndache Mohammed. Design and Construction of a Hydraulic Ram Pump Leonardo Electronic Journal of Practices and Technologies, July 2007. (3) Molyneux F., the Hydraulic ram for Rival Water Supply, Fluid Handling, 1960, p. 274.

The hydraulic ram water pumping system has ability to pump water using gravitational energy or the kinetic energy through flowing source of water. This project aims to analyze and develop the water ram pump in order to meet the desired delivery head up to 3 meter height with less operation cost. The hydraulic ram is designed using CATIA software.

The Design and Fabrication of a Hydraulic Ram Pump (Hydram) is undertaken. It is meant to lift water from a depth of 5 feet below the surface with no other external energy source required. The overall cost of fabrication of this hydram shows that the pump is relatively cheaper than the existing pumps.

This paper presents the analysis of the hydraulic ram pump performance using computational fluid dynamic(CFD). The study specifies that mass flow through the waste valve of hydram is more, so to reduce it an enhancement is done and a new design is created.